AirPods are devices that wirelessly deliver high-quality sound and an unparalleled headphone experience.
But have you ever wondered about the small button on the back of AirPods? What does it do?
The button on the back of AirPods is known as the “force sensor” It is a touch-sensitive area that allows users to interact with their AirPods in a few different ways:
- The primary function of this button is to control audio playback. The sensor, when given a single tap, will pause or play music or a podcast. A single tap can also answer or end the call, while it could also play or pause a voice message when listening to it.
- A double tap on the force sensor can be used to skip to the next track, while a triple tap can be used to go back to the previous track. However, these double and triple-tap functions can be customized in the AirPods settings on your iPhone or other devices.
- The force sensor button can also be used to activate Siri. To do this, simply say “Hey Siri” or press and hold the force sensor until Siri is activated. You can then ask Siri to do things like play a specific song or artist, adjust the volume or send a message.
- Another important function of the force sensor button is related to noise control. If you have AirPods Pro, the force sensor can be used to switch between “transparency mode” and “noise canceling mode“. Transparency mode allows you to hear what’s happening around you while still listening to audio, while noise canceling mode blocks out external noise for a more immersive audio experience.
That’s all.
However, if you’re wondering what the button at the back of the AirPods casing does instead of the Airpods, then here you go.
- The button at the back of the AirPods casing is used to reset the Airpods. If your AirPods run into minor glitches that require you to reset them then you can accomplish that by putting them into the case and then tapping and holding the button at the back until it flashes amber. It’ll reset all active connections on your Airpods
- You can also the back button to manually set up or connect your AirPods to a device.
FAQs
How do I turn on noise Cancelling on AirPods?
- Open the Control Center on your iOS device, while wearing your AirPods.
- Tap and hold the volume slider Press until an additional control is displayed.
- Tap the Noise Cancellation button in the bottom-left corner of the screen.
Alternatively, you can turn on “noise canceling” using your AirPods Pro:
- Put your AirPods Pro in your ears.
- Press and hold the force sensor on the stem of one of the AirPods until you hear a chime. This will activate noise-canceling mode.
What happens when you press the button on the back of the AirPods Case?
The button is known as the setup button and has two primary functions. The first function is that it allows you to reset your AirPods for a new and better connection to your source of audio. Secondly, it is used to activate manual pairing, especially while trying to connect to a non-iOS device.
How do I reset my AirPods?
- Put both AirPods into their case and close the lid.
- Open the lid of the case, and press and hold the setup button on the back of the case until the status light starts flashing amber.
- Release the button and bring your AirPods close to your device. Then follow the instruction displayed on your screen to complete the process.
- Once the AirPods are reset, you will need to pair them again with your device. To do this,
- Go to the Bluetooth settings on your device and select your AirPods from the list of available devices.
Why is one of my AirPod louder Than the Other?
Volume balance could be the reason why one AirPod is louder than the other. It is possible that the volume balance is not set evenly between the two AirPods. To adjust the volume balance, go to Settings > Accessibility > Audio/Visual > Balance and adjust the balance slider until the volume is even.
ALSO, READ > Why is One of my Airpods louder than the other? 10 Fixes
Conclusion
The button on the back of AirPods is a versatile and convenient feature that allows users to control their audio playback, activate Siri, and switch between noise control modes.
Also, the button on the back of the AirPods casing helps reset your Airpods connection and give it a new start. This will help troubleshoot common issues that may come up.
How helpful was this post?
